Invaluable cannot guarantee the accuracy of translations through Google Translate and disclaims any responsibility for inaccurate translations.
Lot 6: An exhibition standard 7 ¼ inch gauge model of
September 17, 2013
Newbury, United KingdomLive Auction
An exhibition standard 7 ¼ inch gauge model of London and North Eastern Railway Class A3 4-6-2 tender locomotive 'Flying Scotsman', 4472, built by the late Mr John Adams of Poole, with a fully brazed and riveted super-heated copper boiler incorporating a combustion chamber with four Galloway type inclined water tubes and all normal fittings including pressure and water gauges, regulator, blow and blow-down valves, injector, safety and whistle valves, fine scale cab fittings including vertically mounted reverse handle with working brass cut-off indicator, brake injector and ejector valves,
drain cock and ash-pan levers, the chassis fittings including three-cylinder configuration with outside valves controlled through Walschaerts valve gear and the inside by Gresley's conjugated valve gear, also including finely fluted motion, twin working injectors, cylinder drain cocks and end-cover relief valves, leaf springs and all external wash-out plugs and doors, running board mounted lubricator pumps, sanding boxes and piped axle lubricating boxes, lamp brackets and vacuum pipe, oval brass work's plate 'London & North Eastern Railway Co. No. 1573 Doncaster 1923', the tender detail including twin water cocks, working hand-brake and water valves, hand feed pump, all lamp brackets, hand irons and vacuum connections, finely detailed axle boxes with leaf springs and full brake gear, finished in lined green livery with polished bright work, 278cm long, the cab 29cm wide.
Boiler History: The 7 ¼" Gauge Society Ltd. Boiler Tests Records. Club Member 480. Boiler Identity No. 7N2. Certificate of Hydraulic Test No. SQ 700038 Test Pressure 135 psi. Working Pressure 90 psi, valid until 14th May 2014. Steam Test Certificate No. ST 700079 Working Pressure 90 psi, expired 26th September 2011. Issued and signed by Mr Brian Reading and Mr Don Ketley, appointed boiler testers for the society. Re-boilered with Swindon boiler by Mr John Dabson.
Provenance: Commissioned and purchased directly from the late Mr John Adams. Please note: Class A3 "Flying Scotsman". Two injectors and a tender feed pump